Fun with the SolidDigi Color Image LCD Shield

If you have purchased the SolidDigi Color Image LCD Shield like the one found here then you have probably also found that even though it is very similar to the SparkFun Color LCD Shield like the one found here that there are some definite differences and incompatibilites when you try to use sketches that were created for use with the SparkFun Shield.

Well, I've taken a little time and gotten some of the libraries and sketches available for the SparkFun Shield to work with the SolidDigi Shield ... all are Arduino 1.0 compatible ... including:
  • The Color LCD Shield Library by Peter Davenport (the SparkFun version is found here).
  • The Arduino-O-scope (the SparkFun version is found here).
  • A SparkFun Sample (the Sparkfun version is found here).
  • Even some tweaks to the SolidDigi Sample to fix colors, etc.
Note: Full credit goes to the original authors of everything above ... I'm just providing some small tweaks so it works on a diffrent shield (or making some subtle changes to the original SolidDigi Sample).

If you are interested in any of this you can find the SolidDigi Shield compatible files here.

Again, I'm far from perfect doing this stuff ... but I'll try to help if you are having any problems.

Updates

 02-16-2015 - Moved Libraries and Sketches to GitHub.

Comments

Post a Comment

Popular posts from this blog

Parallax Smart Card Reader - Revisited

I believe I have mentioned that at some time, I was going to implement an Arduino Library for the Parallax Smart Card Reader.   Well, that time is now. The library has support for the 3 smart cards that are also available from Parallax.   The samples are equivalent to the stand-alone samples that have been available for quite some time now.   The big difference is that using the 3 smart cards is now very similar.   You initialize the cards with an Initialize() function, you read and write data to the cards with Read() and Write() functions.   There is an Authenticate() function available for the IS23SC4442 card.   The parameters are similar for each card (but they aren't always identical ... the IS24SC16A card requires a Page parameter, where the IS24SC02A doesn't, for example).   Update :  This library now has 3 additional functions for each card:  WriteString(), ReadString() and ClearString() ... basically you can write a string at a location on a page of the memory (note,
Read more

Parallax Smart Card Reader Samples for Arduino

Note :  There is a now an Arduino Library available for the Parallax Smart Card Reader, please see the new post in this blog. I ordered one of the Parallax Smart Card Readers as listed on the  Parallax  web site.   I also went ahead and ordered one of each of the three (3) types of Smart Cards that Parallax provides for use with the reader to play around with ... and I believe I have code for the Arduino that works with each of the three types. Note :  I did lock my first IS23SC4442 (32321)  card while learning ... had to order more (this time I ordered a couple) ... but I did seem to get it working without locking a second one.   And ... once you lock one, it can't be unlocked (at least not that I know of) ... but I do now have the ability to make sure the lock-check logic works and see that it is impossible to write to the card's memory when it is locked.  The  IS24C16A (32322) and  IS24C02A (32323) don't have any type of protection built in where they could be l
Read more